Sungai Buloh, Malaysia · since 1989

We make plastic look like metal.

MYM Technology is a global specialist in Physical Vapour Deposition for moulded plastic parts — an elegant metallized surface that can be brilliantly reflective, deeply matte, electrically conductive for EMI shielding, or completely non-conductive when it must not be.

Explore the process See the parts

Years of experience

0M+

Parts produced

International customers

In-house processes

Metallized plastic components produced by MYM Technology

1989 Founded in Kuala Lumpur, and still growing

Who we are

A finishing plant
built around one idea

Our PVD technology is a series of processes that give moulded plastic parts an elegant metallized surface finish. Those finishes are not only cosmetic — the same coatings provide Electro-Magnetic Interference shielding where a product needs it.

And where electrical conductivity is not wanted, the very same appearance can be achieved non-conductively. That single piece of process control is why our parts end up in cars, televisions, medical devices and the things people hold in their hands every day.

Automotive Electronics Medical Telecommunications

Read our story

What we do

Eight processes, one roof

A part can arrive as a drawing and leave as a finished, marked, assembled component without ever leaving the building. One of the eight is why customers come to us — the other seven are why they stay.

01 — Our core

Physical Vapour Deposition

Turning moulded plastic into metal — in a vacuum, one atom at a time.

Vacuum MetallizingSputteringNon-Conductive VMEMI Shielding

Injection Moulding

Single and double shot thermoplastic injection, 50 to 500 ton.

50 – 500 ton

Spray Painting

UV-curing and thermal-curing coatings, gloss to soft-feel.

Gloss → soft-feel

Laser Marking

High-resolution artwork on 2D and 3D part surfaces.

3-axis hybrid · 2D + 3D

Inking, Printing & Hot Stamping

Pad, silk-screen, CNC inking and hot foil, in any colour.

Any colour

Assembly & Sub-Assembly

Manual, semi-auto and autonomation lines with vision inspection.

Vision inspection

3D Printing

FDM prototyping, jigs and masking fixtures made in-house.

FDM · in-house

Medical Products

ISO 13485 and MDA certified manufacture of safe-to-use PPE.

ISO 13485 · MDA

How a part is made

From pellet to mirror finish

Six stages, each measured — because a metallized surface shows every mistake made before it.

Tooling & moulding

Single or double-shot injection, 50–500 ton, with in-house jigs and masking fixtures printed on our own FDM machines.

Surface preparation

Parts are cleaned, base-coated and cured. Nothing reaches the chamber with a surface that would telegraph through the film.

Vacuum deposition

In a chamber pumped down to high vacuum, metal is vaporised and condenses on the part — aluminium for reflectivity, or specialised alloys for NCVM.

Top coat & curing

A protective UV or thermal-cured lacquer locks in the finish and sets the final gloss, from full mirror to deep matte.

Marking & printing

Laser marking, pad and silk-screen printing, CNC inking and hot foil stamping put the artwork exactly where the drawing says.

Assembly & QA

Manual, semi-auto and autonomation assembly with integrated vision inspection, then packing to the customer’s standard.

Where our parts end up

Pick a scene. Click a part.

Our product pages are interactive: hover any highlighted component in the illustration and click it to see the real photograph, what it is, and which of our processes made it.